 This picture shows a bollard 200mm diameter. |
|
| The paint finish is all your customer sees. How does it look The finish turns something unnoticeable into a high quality product. There is a big difference between 60 microns of paint ‘the minimum requirement for most warrantable powder coating systems that follow BS6497’, and the Tri-Resin system with three coats of paint between 140 – 240 microns. |
|
| Everyone has seen a rough finish from rust under the surface, with possibly runs and grinding marks. It does not matter how much care has been taken over the design or the fabrication, if a cheap and nasty, thin coat of paint covers it, that is all the customer sees. There is no substitute for a well prepared and applied thick coat of paint. Nothing else can achieve that smooth lustre finish the observer associates with an expensive, good quality product. The Tri-Resin System will give you the finish your product deserves. |
|