Powder coating facilities

Loading:

  • Two 3-tonne fork-lifts .

Paint lines:

  • Large capacity for heavy items and lengths including 4m, 5m, 6m, 7m, 8m, 9m, 10m, 11m and 12m.
  • Weights including 100kg, 200kg, 300kg, 400kg, 500kg, 600kg, 700kg, 800kg, 900kg, 1000kg or over 1 tonne up to 1.2 tonne loads.

Acknowledged to be the largest box oven in the country for powder coating large components:

  • 11m x 4m x 3m capable of accommodating a 2.0 tonne component, or 5 tonnes of smaller items.

Plant 1:

  • 25m camel back oven capable of accommodating 5m x1.5 at 120kg rigged with automatic Gema guns.

Plant 2:

  • 30m camel back oven capable of accommodating 6.5m x1.5 at 100kg

Removing paint, strip powder coating, stripping powder coatings:

  • For powder coatings - Solvent tank 2.0m x 1.25m x 1.25m.
  • For powder coatings - Pyrolysis, Thermal strip, Incinerator 4.0m x 2.8m x 1.25m.

Blasting:

Two walk-in grit blast bays:

  • Bay 1, blast medium - Aluminium oxide, capable of accommodating 12m x 1.0m x 2.7m high.
  • Bay 2, blast medium - Aluminium oxide, capable of accommodating 5m x 3.5m x 3m.

Acid Bath and spray:

  • 6m x 2.5 x 1m acid bath.

This is useful for ensuring a good etch on aluminium and galvanized steel.

Pre-treatment:

Very few powder coating companies can corrosion inhibit large components. A good corrosion inhibitor will extend the working life of the paint.

  • Chromate system sealed with acrylic resin.
  • Able to anti-corrosive pre-treat 12m long and large three-dimensional objects.

Powder coat large fabrications, stripping powder, anti-corrosion pre-treatment.